"Feifei didn’t do it?" Two crisp voices came to my ears.
Looking at the two little girls Liang Yuan, who were wearing nightgowns, suddenly got up and ran into the health to wash.
The two girls show a grudge against losing to Liang Yuan last night. From time to time, they get Liang Yuan and pretend that I didn’t do it.
As a result, it’s past 9: 00 p.m. after the three of them ate breakfast, Liang Yuan called the Science Park and decided to go around the chip lab after confirming Su Liangyu Park.
Two little girls change Liang Yuan. Last year, Shenzhen bought that royal blue princess dress and followed Liang Yuan out of the temporary hotel barefoot in light brown leather sandals.
The roadside lawn of Liangyuan Science and Technology Park took a deep breath and squinted at the golden sun in the sky and suddenly shouted, "I finally saw the sun pull."
"Small far you don’t want to be a disgrace here" giggling two girls dragged Liang Yuan off the lawn.
Three people talking and laughing came to the office building, climbed the third floor and came to the front of Su Liangyu’s office. Liang Yuan knocked on the door and pushed the door.
"Small far a sight for sore eyes" Su Liangyu looked at Liang Yuan came into the office and said with some surprise.
"What kind of a sight for sore eyes am I? If I hadn’t slept for a whole day with jet lag yesterday, I would have come running." Liang Yuanxiao said.
"Old Su, I called the car factory the other day. It happened that Xin Wang heard that you made a lot of good things?" Liang Yuan asked.
It’s not a good thing’ Su Liangyu said with a smile; "The trial production of the movable plug door was successful."
Because Liang Yuan and two Lori bet that the manual plug door has withstood the test of the structure and run smoothly without any mistakes.
With the function expansion of the control system of the fan and air purifier, the control power of the chip laboratory machine has made a breakthrough. After nearly half a year, a set of plug door control panel was successfully tested in early May.
Because Liang Yuan has always emphasized the modularity of production and the convenience of maintenance, the chip lab side would rather pay extra lines to make all the control systems such as air cylinder control, driving machine and throttle valve into a big block.
"At present, the whole set of movable plug doors has been done 27/2 times, and the experiment will run well for nearly a month. I heard from Xin Wang that the railway administration is going to replace all double-decker buses with air plug sliding doors in late June."
Liang Yuan smiled and said, "That’s not what I said. I heard the news that Lao Su was going to give up the 6-frame ris instruction made by the current single chip microcomputer and redesign the processor."
Chapter 57 Gambling or not gambling
Su Liangyu listened to Liang Yuan with a grin and said, "It’s a long story, but there is something more important than your eyes. You have to make your own decision."
The Republic’s industry originated in 1952 when the Democratic Republic of Germany aided Beiping 71 Factory, namely the North China Line Joint Equipment Factory, which was one of the 156 national key projects in the First Five-Year Plan.
Project 71 was led by the Deputy Prime Minister of GDR in those days, and the whole modern industrial skeleton was built in the newly-born Republic of GDR. It can be said that every component produced in the Republic before the reform and liberation was 100% East German origin.
Shortly after the 71 project was put into production, the agreement between the Republic and the Soviet Union was broken, and experts from East China and Germany were assisted. With the withdrawal of Soviet experts, the Republic of Nigeria was forced to take the road of independent research in the face of the international situation that the East was not bright and the West was not bright.
With the 71 project country taking root, after technical digestion, the state has planned three large industrial clusters, namely, Beiping, Jinmen and Shengjing in the north, and Wusong, the largest economic city in the south, is located in the depths of the mountains in the third-tier Guizhou.
In the early decade of the decade, the strategic situation of reforming the Republic improved, and after the scientific and technological circles resumed exchanges with western countries, they faced the reality of serious backwardness and timely put forward the guiding ideology of "there is no modernization of industry, agriculture and national defense without scientific modernization"
In order to implement the "26" strategy, the central government set up the "computer and large-scale road leading group", the deputy prime minister, to carry out technical transformation of the Republic’s industry in the sixth five-year plan. Now the foundry chip Huajing Factory of Nanhu Science and Technology Park is a part of the achievements of the sixth five-year plan
To be fair, the Sixth Five-Year Plan of the Republic was quite effective in upgrading industrial technology. At least, the chip process was shortened from 1 micron to 6 microns, and the chip was designed independently, which was equivalent to 6 levels. The chip part mastered the 5 micron process technology.
In the face of a series of achievements in the Sixth Five-Year Plan, the Republic is ambitious to launch the Seventh Five-Year Plan (6-9 years) period, and the industry should popularize the 6 micron technology, 3 micron technology and carry out the 1 micron technology pre-research and scientific attack.
From the perspective of the future, the prospect of industrial description in the Republic is very beautiful, and the United States only matured the 1 micron process technology in 2000. At this time, the gap between the mainstream industries in China and the world is far from being described by astronomical units in the future.
In the tenth century, the road-building industry has a remarkable feature: microprocessor research and processor process technology are complementary, and the two are closely linked. For example, ib Intel has a strong process equipment research ability, which is far from being compared with the later generations of Taiwanese workers.
The trend of the paving industry is that the wafer size is getting bigger and bigger, and the number of manufacturing processes is getting smaller and smaller, and the investment in research and development is getting higher and higher. From ten microns to six microns, the investment level is tens of millions of dollars, but from five microns to one micron, the investment level is hundreds of millions of dollars. To calculate the future nano-era manufacturing process investment, it is even more terrible, and the scale has increased by tens of billions of dollars.
When the Republic formulated the Seventh Five-Year Plan, it did not consider how high the road-building industry was, and it was even more conceptual for the road-building industry to increase research funds at several levels.
Therefore, for the industrial enterprises that really implement the Seventh Five-Year Plan, the situation is really bad. With the current scientific research investment of hundreds of thousands of yuan per year by Chinese industrial enterprises, it is different from dreaming to complete the planning objectives of the National Seventh Five-Year Plan.
It is even more hopeless to apply for additional research funds, not to mention that even in the 1910 s, even in the new century, it is impossible for the country to spend billions of dollars on research on processor manufacturing technology
During the Seventh Five-Year Plan period, the state further confirmed that it is necessary to "establish two bases and one point in the north and south", and Shengjing is the key planned city of the northern base.
However, before the revitalization of the old industrial base in the new century, Shengjing was not a Republic. After the national document expressed the intention of attaching great importance to Shengjing’s industrial industry, it stopped. The real scientific research was allocated less than one million, which is different from the real capital demand.
Su Liangyu’s establishment of Nanhu Science Park is the background that Shengjing enterprises are extremely short of money.
Su Liangyu has been a generation of microprocessor designers since the first day of Nanhu Science Park’s official operation.
Although Liang Yuan gave Su Liangyu a country, his factories and research institutes are far behind, but they are still very nervous relative to the huge expenses.
In order to save the non-key equipment in Su Liangyu’s chip laboratory, domestic production was chosen as far as possible to replace production, and Shengjing enterprises just occupied the advantage of home location.
The whole Shengjing, the chief industrial officer of the Republic, is by no means a hollow reputation. As early as the fifties, the first core equipment of the Republic’s road-building process was born from the injection machine, Shengjing Scientific Instrument Factory.
The most widely used process equipment is real technology. Shengjing Real Technology Research Institute is the only national real technology research center in the future Republic. Liangyuan’s alma mater Dongda also owns the best real laboratory in China. Shengjing Automation Research Institute is also the top research base for automation and industrial robots in China.
It can be said that the processing technology involved in the manufacturing of road process equipment can be found in Shengjing. If Liang Yuan sets up a medium-sized (si) road production line with 15 micron process, he can complete the purchase without leaving all the equipment markets in Shengjing.
Faced with such a solid industrial foundation, Su Liangyu will certainly not let go of the laboratory pilot and small-scale test equipment. The equipment that is not difficult to produce diffusion furnaces and detect probe station, various pressure gauges, magnetic valves and real meters are all customized by Shengjing.
In order to match the foreign core equipment, Su Liangyu’s equipment price is very wide, but there are many requirements in terms of equipment accuracy and service life. It has to be said that if Chinese technology is willing to invest, it will still achieve results soon.